It is essential to immediately resolve the problem and make sure how to fix a running toilet without a ball float.
If your toilet didn’t stop running, it would waste tons of water gallons that are not environmentally-friendly. Other than that, it will cost you extra bills.
Besides fixing the running toilet without a ball float, it’s best to know how to fix a running toilet flapper.
Fixing a toilet is much easier than you might wonder. Some fixes are straightforward, and you don’t need a plumber.
Let’s find out first the purpose of the floating balls and how to address running toilet issues.
What is the Purpose of a Floating Ball?
Modern toilets these days feature a toilet fill valve rather than the ball float, commonly seen in conventional toilets.
Both of the features work in the same way in terms of technicality. However, they have some differences in terms of size.
Although, the toilet fill valve is smaller in comparison to the ball float. The fill valve easily fits well in any compact water tank.
The floating ball/ ballcock/ float valve or ball tap’s primary purpose is to control the water filling in the tanks. It prevents overflow, and in cases of low pressure, it prevents the backflow of water.
The floating ball has a valve connected to the hollow float with the help of a lever near the upper part of the tank.
How Does it Work to Control the Amount of Water?
The floating valve is a type of quarter-turn valve which makes use of a pivoting, perforated, and hollow ball that controls the water flow.
The floating ball is designed to utilize the standard line pressure, which presses and steals the ball against the downstream seat.
The ball gets suspended in water and maintains the position while standing in compression by two seats pressing against each other.
It gets open when the ball’s hole is within the flow line and gets shut when it pivots at 90 degrees with the valve handle.
The valve connects with the incoming water supply. It opens and closes with the lever to which the float is mounted.
When the water rises, the floating ball rises to the pre-set level. This mechanism forces the lever to shut the valve and stop the water flow.
Now that you have understood the purpose of the floating ball. You must know that how to fix a running toilet fill valve is more straightforward, which helps you to improve the condition. Fill valves are the gadgets in the water tank. They allow you to control the water level in modern toilets.
You can go for the replacement of the assembly if the fill valve isn’t working correctly.
It is best advised to change the fill valve after every 5-6 years to make sure you enjoy an uninterrupted flushing mechanism.
How to fix a running toilet with a ball float is more straightforward, but if you lift the tank lid and find out there is no floating ball, don’t worry. Have a look at how to fix a running toilet without a ball float.
How to Fix a Running Toilet Without a Ball Float?
How to fix a running toilet without a ball float 2023 is essential to know as running toilets can waste around 200 water gallons each day. If you live in a commercial or residential setting where the water supply is metered, you need to pay extra bills.
Did you lift the toilet tank and find out that your modern toilet lacks the ball float?
Are you seeking how to fix a running toilet without a ball float? Then look no further and have a look at the steps you can perform while replacing the fill valve with the new assembly:
Buy new fill valve assembly and collect all materials:
Materials and Requirements
Go to the local hardware store and buy a fill valve assembly unit.
Buy the fill valve unit, which includes gasket, refill tube, fill valve assembly, and lock nut. It would be best if you also buy a wrench with a small container to collect water and replace your fill valve.
Step 1: Switch Off Water Supply
- Close the water supply before you replace the fill valve and open the tank lid to offer it a perfect rinse.
Step 2: Test the Old Fill Valve
- The valve is present on the left side of the cistern. It fills the tank with the required amount of water more efficiently in comparison to the ball float.
- The fill valve is, therefore, economical and works well in the long run.
- Look for your old valve to check whether it got worn out or not. If the base of the valve is still intact, then the replacement process might be more accessible.
- Pull the lock ring back to the bottom of the fill valve. It enables you to pull back the fill valve up from the bottom side and eliminate the refill tube.
Step 3: How to Fix a Running Toilet Without a Ball Float If the Old Base is Intact?
- The new fill valve comes with the base, but you don’t need it if your previous base is still intact.
- Push the fill valve down over the old base within the tank.
- Now lock the ring present behind the fill valve. Directly connect the overflow pipe with the refill tube.
- Now adjust the height of the water level accordingly to achieve proper height. It prevents the toilet tank from being overfilled with water.
Step 4: How to Fix a Running Toilet Without a Ball Float if the Old Base is Worn Out?
- If your fill valve base is not intact, you need to remove the entire unit and replace it accordingly.
- Now empty the toilet tank and place a bucket or a container underneath the water supply hose, making the water drip within the container rather than spilling.
- Now unscrew the hose using hands to get to the bottom of the tank. Get rid of the lock nut correctly using an adjustable wrench.
- Remove the entire old unit and throw it within the trash can. Install the new assembly accordingly while matching the height of the overflow pipe and the tank.
How to Fix a Running Toilet Without a Flapper?
When the flapper isn’t the issue, check the water level as it is another common cause of running toilets. If the water level is exceptionally high, it will continuously flow in the overflow tube. Fix the problem immediately to water spillage.
Shut the water supply pipe to the toilet. Remove the needle for emptying the tank, which prevents the water from going into the tank.
Also, check the drain valve, which is a round rubber that presents water to enter the water tank. Clean the drain valve, and it might solve the running toilet issue.
How to Fix a Running Toilet with a Flapper?
For running toilet issues with a flapper, switch off the water supply and check the flapper. The flapper is a rubber seal that prevents water from draining into the toilet bowl from the tank. It is one of the common causes of running toilets.
Now remove the toilet lid and look within. Now adjust chain length accordingly to maintain the water level. If the chain is too small, it will drain water continuously, and if too long, it will prevent the flapper from the seal. Inspect flapper by unhooking it from the sides. Check the flapper for warping, corrosion, deposits, discoloration, disintegration, or other signs.
If you are suffering from the dirty flapper, you can clean it and fix the running toilet. If it’s worn, you need to replace the flapper to improve the running toilet.
Buy a new flapper from the hardware store and attach it in the same place. Please attach it to the hooks over the pins and on the overflow tube.
Now switch on the water supply to check the functioning.
Conclusion
How to fix a running toilet with a button flush is also commonly done by the users. If the dual flush toilet keeps running after a flush, you can try the other steps to fix a running toilet without a ball float.
I believe that this guide will help you in resolving the running toilet issue as it’s a disaster. The toilet is one of the centerpieces of your house. No one can live without a toilet. The disturbing noise and overflowing water is a problematic issue which you need to resolve immediately.
You don’t need a plumber for resolving this simple issue. You’ll get rid of the running toilet issue with our guide.
Leave a Reply